ACRA FEL-22 / FEL-26 FLAT BED CNC - TEACH LATHE

STANDARD EQUIPMENT
  • FANUC 20-TA Control
  • Manual / CNC
  • Conversational Features
  • Macro Programming
  • Manual Handwheels
  • Heavily Ribbed Bed and Casting
  • 4" Spindle Bore
  • FEL-22:Q.C. Toolpost or Square Toolpost
  • FEL-26: H4 Turret
  • Tailstock
  • 10" Steady Rest
  • Dead Center and Sleeve
  • 12" Drive Plate
  • Full Splashguard
  • Programmable Coolant Sys.
  • Auto Way Lube
  • Worklight, Pilot Lamp
  • Levelling Bolts and Pads
  • Manuals, Toolbox

 

STANDARD PRICE

FEL-2235 ENC $58,600.00 FEL-2257 ENC $62,200.00 FEL-2288 ENC $67,700.00

FEL-2635 ENC $67,700.00 FEL-2657 ENC $71,400.00 FEL-2688 ENC $76,900.00

OPTIONS
16" Steady Rest $ 900.00
7" Follow Rest $ 625.00
Chip Conveyor $ 4,375.00 $ 4,675.00 $ 5,500.00
Hydraulic Tailstock $ 2,250.00
5C Collet Closer $ P.O.R.
Hydraulic 3-Jaw Chuck $ 5,250.00
Opt. Spindle Bore 3.4" $ P.O.R.


Machine Warranty - 1 year from installation
Control Warranty – 2 years from installation (Continental U.S.)

 

 

SPECIFICATIONS
ACRA FEL-22 / FEL-26 FLAT BED CNC-TEACH LATHE
 
  • Capacity Swing over Bed 22" 26"
  • Swing over Cross Slide 12.4" 16"
  • Between Centers 35" / 57" / 88"
  • Max Turning Dia. 19.7" 23.6"
  • Width of Bed 15.75"
  • Spindle Bore 4" (Opt.3.4")
  • Gear Ranges 2
  • RPM, Low Range 10 - 460
  • RPM, High Range 460 - 2000(2500Opt.)
  • Nose A2-8
  • Taper MT #7
  • Motor 15 Hp
  • Axes X Travel 13.8"
  • Z Travel 33.5" / 57.5" / 89"
  • Rapid 393 IPM
  • X Motor 1.2 Hp
  • Z Motor 1.8 Hp
  • Tailstock Quill Diameter 2.9"
  • Quill Stroke 7"
  • Quill Taper MT #5
  • Overview Net Weight (see Chart Below)
  • Footprint (see Chart Below)
  • Control FANUC 20-TA
  • Power 220 VAC, 20 KVA
  • Air Required No
  • Model Wt. Model Wt. Dimensions
    •
  • FEL-2233 6950 lbs FEL-2633 7060 lbs 114" x 72" x 75"
  • FEL-2257 7610 lbs FEL-2657 7720 lbs 138" x 72" x 75"
  • FEL-2288 8380 lbs FEL-2688 8490 lbs 170" x 72" x 75"

Return

Home

Copyright 2000 MJB Machinery,  Web Design Davita Products