swing over bed .                                     13"
swing over cross slide                               8"
distance between centers                        40"
swing over gap                                       20"
width of bed                                            8"

HEADSTOCK:

spindle nose                                  ASA-D1-4
spindle bore                                        1-9/16"
taper of spindle                                   M.T.#5
2 speeds motor (16speeds)    42-2000 R.P.M

THREADS AND FEEDS:

inch threads                  4-112 T.P.I. (40-kinds)
metric threads                     0.25-6.0 (22 kinds)
module pitch threads   0.25-3.0 M.P. (optional)
D.P. threads                    8-112 D.P. (optional)
longitudinal feed range                  0.002"-0.04"
cross feed range                          0.001"-0.02"
leadscrew diameter/pitch                1"\ 4 T.P.I.

CARRIAGE:

cross slide travel                            .8-1/16"
compound slide travel                       3-3/4"
toolblock capacity                    .3/4" x  3/4"

TAILSTOCK                          
                           
center                                            M.T.#3
spindle travel \ diameter         4-1/4"\1-1/2"

POWER:

main motor                       3 h.p.  3 ph.
coolant pump                 1/8 h.p.  3 ph

MACHINE DIMENSIONS:

machine size (L x W)             74" x 28"
packing size (L x W x H)    76" x 29" x 60"
net \ gross weight           .1694lbs.\2156 lbs.

STANDARD EQUIPMENT:

• main motor 3 h.p.
• stand with chip tray.
• rapid brake.
• back plate (d1-4).
• MT #3 center.
• reducing sleeve.
• threading dial.
• tool kit & box.
• 4 way tool post.
• complete electrical equipment.
• instruction manual and parts list.
• gap bed.
• coolant pump system.