18"x60"   $16,500          $14,950
18"x80"   $17,750          $15,950
18"x120" $24,950          $22,500

LUXMATTER 1800G

swing over bed                      18"
swing over cross slide            11"
distance between centers 1862         60"
                                       1882         80"
                                       18122     122"
swing over gap                       24-1/4"
width of bed                           14-1/2"

HEADSTOCK:

spindle .nose                        ASA-D1-8
spindle bore                            3-3/16"
taper of spindle                       M.T.#7
spindle speeds (12 steps) 18-1500 rpms
                                      
THREADS AND FEEDS:

inch threads         2-72 T.P.I. (45-kinds)
metric threads          0.2-14.0 (40 kinds)
module pitch threads 0.3-3.5mp (18 kinds)
D.P. threads              8-44 D.P. (21 kinds)
longitudinal feed range      0.0016"-0.04"
cross feed range                 0.008"-0.02"
leadscrew diameter/pitch    1-1/2"\. 4" tpi

CARRIAGE:

saddle width                              20"
cross slide travel              10-13/16"
cross slide cover width                 9"
compound slide travel            6-3/8"
compound slide width long  6" x 16-1/2"
toolblock capacity                  1" x  1"
apron width depth          17-5/8" x 4.7

TAILSTOCK                          
                           
center                               M.T.#5
spindle travel                       7-7/8"
spindle dia                       2-15/16"

POWER:

main motor              10 h.p. 3 ph.
coolant pump          1/8 h.p. 3 ph

MACHINE DIMENSIONS:

machine size (L x W) 1862      107" x 43"
                                 1882      127" x 43"
                                 18122    169" x 43"
packing size (LxWxH).1862    116"x44"x64"
                                   1882    136"x44"x64"
                                   18122   180"x44"x64'
net \ gross weight   1862    6490\7370lbs
                             1882   6710\7700lbs
                             18122   7700\8800lbs

STANDARD EQUIPMENT:

• main motor 10 h.p. 3ph.
• one piece casting iron stand
• back plate (D1-8)
• rapid brake.
• MT #5 center.
• reducing sleeve.
• threading dial.
• tool kit & box.
• 4 way tool post.
• complete electrical equipment.
• instruction manual and parts list.
• gap bed.
• coolant pump system.